Connect the computer to the network via an ethernet cable. .
This is a two-part step.
Turn off Router B's dhcp function.It should not be one that will be assigned by your dhcp server (you will either need to reserve it on the dhcp server, or select an address that is in the same subnet but outside of the range being used for dhcp). .Instructions below work for a Version A 825. .Your home Wi-Fi router bex deskpro combo keygen has an embedded AP (or even two or three embedded APs in the case of a dual-band or tri-band router) in addition to its function as stronghold 2 deluxe crack 22.214.171.124 a basic router.First you'll need to find out Router A's IP address.At the Command Prompt window, type ipconfig then press Enter.Connect directly from your computer to a LAN port on the router using an ethernet cable. .For this guide, we'll assume is Router A's.For example, if the router IP address is then the IP pool of addresses will range from.The wan has the addresses.30.x.x but I cannot get the router to be changed to those addresses. .Windows 8 just type cmd when you're at the Metro Start menu, then press Enter).Connect the WAN port to your main network (10.30.X.X and the local computers to the LAN or wireless connections of the 825. .
But first you need to change some settings. .
I think you really want to use it as an access point, and not a router).
This will also likely be your case because many home routers (from Netgear, Asus, D-Link etc.) tend to use this IP address by default.Either way, all devices connected to either router will be part of the same network.Address of D-Link.38, dhcp off (or on internet connection dynamic (or static) with DNS chemical process calculations books set to windows server.Note: Some Wi-Fi routers feature an Access Point mode (you'll see that in its features list if it does).Once you have the router's IP address (which always consists of four groups of numbers separated by a dot in between each group) use it to determine its IP range.For example, if Router A's IP is, you can make the IP of Router B (make sure that you haven't manually assigned this IP to any other device, and if you have, choose a different IP address instead) then save the changes.(Depending on the interface, some routers allow you to do step 3 and 4 as one step without restarting).Connect a computer to Router B via Wi-Fi or with a network cable through one of its LAN ports to find out what the router's current IP is (repeat the first part of step 2 above to do this).Network cable connected to the D-Link internet port and to #2 port on D-Link switch *Wireless devices can not see local network but can see the internet.Step 4: Turn off Router B's dhcp Server function.